Archive for the ‘Intelligent network’ Category

Convergence Solutions – Explained

Thursday, November 12th, 2009

Convergence Solutions.

There is a lot of discussion about the merits of Voice over IP—or IP Telephony—at a technical level, but less about the business issues associated with a converged solution.

Black Box is a major supplier of infrastructure systems and is well placed to help you decide what is the best option for your business.

Black Box has experience from the largest to the most basic network. Whether this is the infrastructure for the latest generation network for a mobile operator or Motorola, or a budget network for a small business or even a complete voice installation for one of America’s biggest retailers, we have a solution.

Convergence means having one common system to carry all forms of information (namely voice, data, video, etc.). Traditionally, each service has had its own network and associated technology. Voice utilised expensive PBX or exchange equipment with dedicated wiring to telephones. Data used a completely different set of cables and equipment, most commonly based on Ethernet. With technological advances and the growth of the Internet though, it is now possible to have one network carrying all the services.

So is it right for you, either now or for the future? Black Box can help you decide, plan your network and install the system; however, the solution will depend on a wide variety of factors. What you have now will influence the path you take.

It is a fact that a converged solution can save you money. The real savings, costs and benefits, however, are far less clear because the choices will be dictated by the need to move seamlessly to new systems without interruption of service or loss of quality. Depending on the age, facilities and performance of the existing voice equipment, you may want to consider conversion rather than replacement. Simply use a converter or special interface to allow some or all of the existing connections to utilise low-cost IP call facilities. Having one system simplifies management and support, reducing costs. Modern systems can be accessed and managed remotely, allowing the number of specialist staff on site to be minimised.

Any new system needs to integrate and offer compatibility both with the internal and external networks. There are international standards for IP telephony, so selecting the right equipment becomes easier. The two major techniques used are H323 and SIP. H323 is more established, especially when ISDN is used for the communication network. SIP is newer, but it is supported by major players such as Cisco and Microsoft®. Both will co-exist for some while, and work is under way to allow interoperation between them.

Data packets can be delayed and, if necessary, retransmitted in the event of errors or problems. This is not a possibility with voice communication. Overlaying voice traffic on an old data network can create bottlenecks and delays, resulting in poor quality voice and slow data traffic. The network design needs to be checked and, if required, upgraded to support the extra traffic and ensure priority to the most critical types of traffic. If video is part of the system, this will place even greater demands on capacity.

Starting with a clean sheet and scrapping all existing systems is an ideal unavailable in all but a few special cases. The need to provide paths to migrate from old legacy systems and procedures toward convergence is therefore paramount. Black Box has long been acknowledged as a specialist provider of products and technology that solves the problem of mismatch. Whether it’s a special cable, an interface converter or a complete change of protocol, Black Box is renowned for coming up with a solution.

If all communication is taking place over a single converged network, then this could be considered a single point of failure. In reality, networks can be designed to be fully resilient; however, this has to be planned carefully and tested to make sure that everything continues to work smoothly in the event of problems. Having a converged network will make it considerably easier to establish disaster recovery procedures for a major critical event, such as a fire destroying an entire building. The requirements of new legislation on corporate governance also has an impact on communications, security and integrity of networks. Consolidating all systems under one management enables better control and eases problems of compliance with the requirements of legislation such as Sarbains Oxley, etc.

Any system that involves access from the Internet has to be secure. Users have to be sure that they will not be overheard and that confidential information is not available to the outside world. Building in firewalls and other security procedures should be part of the design process, not a late fix to a leaky system. Support should be rapidly available when required and delivered in the most suitable and flexible manner to match the needs of the situation. Black Box provides on-site and on-line Technical Support on a local and global basis 24 hours a day, 365 days a year.

Energy Transformation Technologies

Thursday, June 25th, 2009

The energy utilities industry is very conservative. The combination of long asset life and the absolute priority on safety and reliability has meant that many of the technologies have not changed radically since the 1950s.

Now that is changing. Faced with the rapid shift in energy-consumption patterns, the move to green energy solutions and the evolution of communications technologies, utilities are reassessing their energy delivery strategies.

This article explores the pressures that this industry is facing. It takes a look at how two of the big technology changes — smart grids and smart metering — mandate the need for a cohesive communications strategy.

The Industry Pressures

There are four fundamental pressures on today’s utilities:

  • The changing pattern of electricity consumption, driven by the extensive proliferation of air conditioning resulting in the peak period of electricity consumption moving to the heat of summer.
  • The move toward green energy solutions, epitomized by the European Commission, which requires (among other things) 20% renewable energies in overall EU energy consumption by 2020.1 This is not uniquely European: politicians everywhere are pressuring utilities to accommodate environmental change.
  • Consumers and regulators alike are demanding highly reliable energy delivery, vital in maintaining an efficient national economy.
  • Financial stakeholders require better operational efficiency. Large-scale investment in new energy infrastructure is to be avoided where feasible. Given that the basic electricity infrastructure lacks the flexibility to track swiftly changing market pressures, utilities are examining two complementary approaches to increasing the efficiency of their networks:
  • Intelligent networks
  • Smart metering

Intelligent Networks

Intelligent networks (a term covering smart grids, substation automation and distribution automation) aim to improve the utilization of the network assets by monitoring and controlling them far more closely than previously possible. For example:

  • Make the energy-carrying capacity of a network dynamic by measuring in real time climatic conditions such as instantaneous temperature or the cooling effect of the wind, thus enabling better network utilization.
  • Today’s distribution networks have little real-time measurement or control. Intelligent technologies will provide a far more accurate picture of demand, energy flows and network incidents, yielding a major improvement in energy reliability and asset utilization.
  • The modern techniques of “condition monitoring” — monitoring the network assets for telltale signs of performance degradation — allow a very accurate forecast of equipment failures to be built. This means that assets can be replaced on a just-in-time basis, delivering significant investment savings and increased energy reliability. The benefits of intelligent energy networks are huge. They extend the lifetime of the assets, optimize power flows, increase energy reliability and enable investment to be focused where it is most needed.

Smart Metering

Smart metering is primarily intended to make consumers more conscious of energy consumption, thus leading to reduced consumption during peak periods and an overall reduction in the production of greenhouse gases.

Informing the user is merely the first step: facilitating the desired action by consumers requires two other capabilities:

  • The use of tariffs to encourage energy consciousness (whereby high instantaneous demand during periods of peak demand is charged a premium price)
  • Direct control of major household appliances

Smart metering brings its own set of challenges. This is a new application using new technologies — the smart meters, the communications network to access millions of devices and the platform to manage them.

Communications as the Key Enabler

As stated above, the technologies used in the energy networks have not changed radically since the 1950s. Thus, communications networks have, in general, been built up over several decades using ad hoc, application-specific technologies, with little network sharing and, in many cases, with little management or control.

To deliver the benefits of intelligent networks and smart metering, a homogeneous, reliable, flexible communications infrastructure is essential. Today, it is feasible to create a single cohesive network that will support:

  • Latency-critical applications such as teleprotection
  • Existing modem-based SCADA applications
  • Intelligent network and smart metering applications using modern communications protocols
  • IEC61850 Ethernet-based services for future automation applications
  • Other future applications, such as closed-circuit TV (CCTV) for physical security, which will expect the latest communications protocols to be supported This results in a typical infrastructure as shown in Figure 1.

In this architecture, the multi-service optical transport layer ensures the support of both mission-critical operations such as teleprotection services, with their very tight technical requirements, and existing applications using traditional TDM-based protocols. Simultaneously, it efficiently transports packet-based data for new services and applications on the same infrastructure.

The IP/MPLS layer supports new packet-based applications traffic, including substation automation, smart metering and security services with a virtualized network using Layer 2 and Layer 3 VPNs. Corporate voice, video and data applications can also be supported, with traffic management features ensuring that mission-critical operational traffic is given priority.

This network architecture delivers high reliability with secure support of mission-critical operations traffic. The associated end-to-end management capability makes this network easy to manage, allowing utilities to lower the skill barrier for staff.

It has allowed existing applications to be migrated and supported without disruption and has enabled systems operators to realize the consequent efficiency and reliability improvements.

For those starting down the road to energy network transformation, experience suggests a number of steps:

  • By starting with the high-voltage substations, a modernized multi-service TDM and Ethernet transport footprint can be established that will support all utility services.
  • Substation transformation to Ethernet services will be driven by asset life cycle management or new plant construction. New Intelligent Electrical Devices will simply plug in to the transport footprint established earlier.
  • Distribution automation and smart metering should be considered as complementary activities (where the regulatory regime permits). In this way, an access network can be built that supports both these applications in a single, cohesive network. This requires that the complete future access requirements are considered at the outset of the project, otherwise utilities risk perpetuating application-specific, vertically integrated networks, thereby aggravating communications inefficiency.


Energy utilities are on the cusp of the first real technology change in network and metering technologies since the 1950s. This change is predicated on the requirement for a robust, reliable and flexible communications network that will support existing mission-critical applications as well as the evolution to modern smart grid and smart metering technologies.